PL2303 Prolific Driver

  • Version v1.16.0
  • Download 92
  • File Size 2.86 MB
  • Total View 173
  • Create Date March 15, 2018
  • Last Updated May 14, 2020

PL2303 USB-to-Serial Driver Installer
WHQL Driver Version Information

  • Driver Installer & Build date: 1.16.0 (2016-10-7)
  • Windows Vista, 7, 10 (32 & 64-bit)

Step to Install

  1. Power on your computer and boot to Windows. Run or double-click the PL-2303 Windows Driver
    Installer program.
  2. The Install Shield Wizard will be displayed to inform you that the PL-2303 USB-to-Serial driver
    will be installed on your computer. Click Next to continue.
  3. The PL-2303 Driver Installer program will then start to install the drivers needed.
  4. Click the Finish button to close the Install Shield program. If you have plugged the cable into the
    PC while running the setup installation, please unplug and re plug the cable for the system to
    detect the device.
  5. Plug in the USB to Serial adapter to the PC USB port. Windows should detect the driver as
    Prolific USB-to-Serial Comm Port.
  6. Check chip version running check chip version program
Note:
  • Windows 8/8.1 are NOT supported
  • Run check chip version tool program to check chip version